Skip to content

12′ Offshore 3 Phase Refrigerated – Twin Zone

Description

3 phase refrigerated twin zone (half freezer/half chiller) modified for offshore certified with lifting gear. Dividing panel down the centre, left side chiller right side freezer. Refurbished ISO refrigerated unit. Full Controlled Operation: Variable automatic defrost cycle, Automatic temperature sensing & monitoring. Specially designed for the use on offshore platforms, vessels & oil rigs. Container fitted into engineered frame with protection bars surrounding to reduce impact damage. Our containers comply with DNV 2.7-1 standards and are certified to EN12079-1 current offshore guidelines.

External Dimentions
Length 12' Ft , 3657 mm
Width 8' Ft , 2440 mm
Height 9'10 , 3000 mm
Internal Dimentions
Length 2600 mm
Width 1010 mm
Height 2230 mm
Door Openings
Width 880 mm
Height 2140 mm
Weight & Capacity
Tare 4000 Kgs
Net 7100 Kgs
Gross 11100 Kgs
Power
Phase 3
Voltage 440 V
Running Amp Draw 21 Amps
Plug Type 4 Pin 32 Amp
Outlet Required 4 or 5 Pin 32 Amp Female Socket
Temp Range -25ºC to +25ºC

Container Delivery & Transport Options

Choosing the right truck type helps make your container delivery safer, smoother and more cost-effective. Review the main transport options below to help plan access, clearance and placement before delivery.

Side Loader / Swing Lift

Best for: sites with clear side access.

A side loader unloads the container from the driver’s side of the truck, placing the container beside the vehicle

  • Fast and efficient unloading
  • Suitable for most standard deliveries
  • Requires enough width for truck and container
Clearance Required

20ft: 4.6m H x 6m W x 10m L
40ft: 4.6m H x 6m W x 16m L

Tilt Tray Truck

Best for: cost-effective delivery where rear access is available.

A tilt tray reverses into position, tilts the tray and slides the container off the rear as the truck moves forward.

  • Usually the cheapest transport option
  • Suitable for empty or lighter containers
  • Weight restrictions can apply
Clearance Required

20ft: 5m H x 3.5m W x 20m L
40ft: 6m H x 3.5m W x 40m L

Tilt Tray Truck

Best for: tight access, uneven ground or precise placement.A Hiab truck uses a mounted crane to lift and position the container more accurately, including onto blocks for levelling.
  • Most precise placement option
  • Helpful for difficult access sites
  • Can place containers approx. 4m from the truck
Clearance Required

20ft: 4.6m entry height, 10m unload height, 3.5m W x 10m L
40ft: 4.6m entry height, 10m unload height, 3.5m W x 20m L

Before Delivery, Please Check

✓ Suitable access and clearance

✓ Firm, level ground

✓ No trees, awnings or overhead obstacles

✓ At least 1m clearance from power lines

✓ 1.2m gap for refrigerated container airflow

✓ Container door direction confirmed

Unsure Which Truck Type Suits Your Site?

Our team can help determine the most suitable delivery method based on your site access, clearance and container placement requirements